PrusaSlicer 2.3.0-alpha3 erschienen inkl. Download

Still und heimlich wurde vor knapp 17 Stunden eine neue Alpha Version vom PrusaSlicer veröffentlicht, welcher mittlerweile die Versionsnummer Alpha3 hat, somit dürfte bald ein weiteres Release kommen, welches dann die RC (Release Candidate) enthält.

Auch in der neuen Alpha3 Version wurde wieder eine Menge hinzugefügt oder gegenüber den anderen Versionen verbessert. Ich vermisse jedoch immer noch, dass unsere deutschen Filament-Hersteller ihre eigenen Profile bekommen. Es sind zwar schon viele vorhanden, aber der deutsche Markt geht dort leicht unter.

Ansonsten wie immer der gewohnte Changelog:

Improvements with respect to PrusaSlicer 2.3.0-alpha2

  • The descriptions of configuration parameters in settings tabs now work as hyperlinks that open the respective page in our online help center. There is no hyperlink when the page does not exist for the parameter.
  • Added support for Repetier server print host. (thanks @docbobo#4384)
  • New option in Preferences allows to invert mouse wheel for zooming (#1336#4395#4701)
  • OSX specific: Settings dialog for 3DConnexion devices (Cmd+M) was enabled again to allow configuration of speed. The dialog was removed in 2.3.0-alpha1 in hopes that all related settings would be configurable in driver settings directly, but this turned out not to be the case for old 3DConnexion devices, which are not supported by the 3DConnexion driver correctly (#4892)
  • G-Code Viewer is now able to extract config from gcode created by Slic3r and Slic3rPE (#4982)
  • G-Code shows name of loaded .gcode in the title bar
  • G-Code Viewer reports invalid .gcode files
  • New icons for standalone G-Code Viewer
  • Tool marker in G-Code preview is visible by default when the horizontal slider is not at its end position.
  • Configuration snapshots were extended to capture and restore SLA print profiles, SLA material profiles and Physical printers configuration.
  • Reworked Export finished notification. It now contains path to G-code, „Open folder“ hyperlink and Eject removable media button.
  • Renamed „FDM Support Editing“ to „Paint-on supports“ and „Seam Editing“ to „Seam painting“, new icon for the paint-on supports gizmo.
  • Linux: Integration of Flatpak configuration files thanks to @xarbit (#3064#4039)
  • Linux: Added a desktop file for standalone G-Code Viewer
  • Filament stats exported to G-code are now exported with higher precision to match values shown in the UI (#780, thanks to @stelgenhof)
  • Unmount message slightly reworded by @vranisimo, thanks (#4523)

Bugs fixed, regressions with respect to PrusaSlicer 2.2.0

  • Switching of parameter pages is now faster. The lag was quite noticeable on Windows.
  • Fixed unexpected switch to non-perspective camera in certain scenarios (#4987)
  • Place on face sometimes positioned the object slightly inclined instead of perfectly flat (#3505)
  • OSX specific: Mouse position was not correctly calculated with Retina display when the mouse wheel was being rotated

Bugs fixed, reported for PrusaSlicer 2.3.0-alpha2

  • Windows: Previous alpha did not start on Windows 7 (#4972#4974#4979#4994)
  • Fixed incorrect time estimates (#4986#5066)
  • G-Codes for printers not supporting remaining times contained internal G-Code annotations as comments by mistake
  • Horizontal slider in 3D preview is correctly updated when ‚Sequential slider only applied to top layer‘ preference option is toggled.
  • Horizontal slider range is correctly updated when individual G-code features are turned visible or invisible.
  • Fixed crash in monotonous infill happening in very specific geometry situations.
  • Notifications were sometimes erroneously shifted to the left in Preview mode.
  • Shift+Tab erroneously showed/hid the sidebar in the standalone G-Code Viewer (#5009)
  • Parsing of the G-Code annotations was made more specific so that comments provided by the user through custom G-Codes will not be interpreted as PrusaSlicer’s own annotations (#4992)
  • Linux: Standalone G-Code Viewer did not work correctly when started from PrusaSlicer or with a .gcode file as an argument (#5013)
  • Linux: Fix crashes on Linux when incompatible libpng version was installed in system (#4908)

New 3rd party profiles

PrusaSlicer-2.3.0-alpha3+-202011041520.dmg38.4 MB
PrusaSlicer-2.3.0-alpha3+linux-armv7l-202011041521.tar.bz253.3 MB
PrusaSlicer-2.3.0-alpha3+linux-x64-202011041552.AppImage62.1 MB
PrusaSlicer-2.3.0-alpha3+linux-x64-202011041552.tar.bz255 MB
PrusaSlicer-2.3.0-alpha3+linux-x64-GTK3-202011041604.AppImage61.3 MB
PrusaSlicer-2.3.0-alpha3+linux-x64-GTK3-202011041604.tar.bz254.4 MB
PrusaSlicer-2.3.0-alpha3+win32-202011041521.zip37.2 MB
PrusaSlicer-2.3.0-alpha3+win64-202011041552.zip40.5 MB

Check Also

PrusaSlicer 2.3.0-alpha4 erschienen

Vor wenigen Stunden wurde eine neue Version vom Prusa Slicer veröffentlicht, welcher nun in der …

Kommentar verfassen